6416/C3J20B Bearing

Deep groove ball electric insulation bearing 6416/C3J20B

6416/C3J20B Bore d (mm): 80
6416/C3J20B Outer Diameter D: 200
6416/C3J20B Type: Deep groove ball electric insulation bearing
Email: [email protected]


  • 6416/C3J20B Details
TR Insulated Bearing Co.,LTD specializes in selling 6416/C3J20B Deep groove ball electric insulation bearing, 6416/C3J20B bearing related information: Model: 6416/C3J20B Bearing; Type: Deep groove ball electric insulation bearing;Bore Diameter (mm) : 80; Outer Diameter (mm) : 200, if you want to know more about 6416/C3J20B Bearing for information, you can do online consultation or call the hotline and email us [email protected], we will serve you in detail.
 
6416/C3J20B Bearing Electrical Insulation Bearing Product Features: Electrically insulated bearings can avoid damage caused by electrical corrosion, so it can be used in motors to ensure more reliable operation than ordinary bearings. It is more cost effective and reliable than other insulation methods such as shaft or housing insulation. Insulated bearings have the same dimensions and basic technology (bearing capacity) as non-insulated bearings and are therefore completely interchangeable. Insulated bearings have a 100μm thick coating on the outer ring surface that can withstand voltages up to 1000 V DC. A special spray process creates a uniform coating of uniform thickness and adhesion, which is then further treated to protect it from moisture and humidity. Electrically insulated bearings have a longer service life than other standard non-insulated bearings. Because it is completely immune to damage caused by overcurrent, it has very high operational reliability. The most commonly used insulating coating in motors is the VL0241. Even in humid conditions, it can very well prevent the passage of current. Ceramic coated bearings also require sealing. Product application: It is suitable for motors, generators, especially variable frequency motors. There are three types of insulating bearings that are often sold on the market: surface-coated ceramics, surface-coated resins, and ceramics for rolling elements. Surface coated ceramics have the widest range of uses. Installation method of electric insulating bearing: The insulating bearing chamber is made of insulating material with a certain hardness in the inner hole and the end surface of the bearing. Matters needing attention when installing insulated bearings, do not directly hit the bearing surface with a hammer during installation, and do not use insulated bearings with surface defects to clean the bearing chamber and bearings. Do not adhere to the conductors and choose a suitable shoulder. To avoid current flowing from the bearing side through the bearing, the bearing chamber must be inverted at least 0.5MM deep slope 10-15 & deg; angle, for DC motor, the shaft should be grounded during the resistance test. 


  • Related Products
Basic Bearing No. Bore d (mm) Outer Diameter D (mm) Type

6019/C3J20B 95 145 Deep groove ball electric insulation bearing
6212M/C3J20B 60 110 Deep groove ball electric insulation bearing
6315M/C3VL0241 75 160 Deep groove ball electric insulation bearing
6316-C3-J20A 80 170 Deep groove ball electric insulation bearing
6032M/C3J20AA 160 240 Deep groove ball electric insulation bearing
6232M/C3J20B 160 290 Deep groove ball electric insulation bearing
6216/C3J20B 80 140 Deep groove ball electric insulation bearing
6314M-C3-J20B 70 150 Deep groove ball electric insulation bearing
6026/C3VL0241 130 200 Deep groove ball electric insulation bearing
6244M/C3J20A 220 400 Deep groove ball electric insulation bearing


Leave Message