6032/C3VL0241 Bearing

Deep groove ball electric insulation bearing 6032/C3VL0241

6032/C3VL0241 Bore d (mm): 160
6032/C3VL0241 Outer Diameter D: 240
6032/C3VL0241 Type: Deep groove ball electric insulation bearing
Email: [email protected]


  • 6032/C3VL0241 Details
TR Insulated Bearing Co.,LTD specializes in selling 6032/C3VL0241 Deep groove ball electric insulation bearing, 6032/C3VL0241 bearing related information: Model: 6032/C3VL0241 Bearing; Type: Deep groove ball electric insulation bearing;Bore Diameter (mm) : 160; Outer Diameter (mm) : 240, if you want to know more about 6032/C3VL0241 Bearing for information, you can do online consultation or call the hotline and email us [email protected], we will serve you in detail.
 
6032/C3VL0241 Bearing Insulated bearing product features: Electrically insulated bearings can avoid damage caused by electrical corrosion, so it can be used in motors to ensure more reliable operation than ordinary bearings. It is more cost effective and reliable than other insulation methods such as shaft or housing insulation. Insulated bearings have the same dimensions and basic technology (bearing capacity) as non-insulated bearings and are therefore completely interchangeable. Insulated bearings have a 100μm thick coating on the outer ring surface that can withstand voltages up to 1000 V DC. A special spray process creates a uniform coating of uniform thickness and adhesion, which is then further treated to protect it from moisture and humidity. Electrically insulated bearings have a longer service life than other standard non-insulated bearings. Because it is completely immune to damage caused by overcurrent, it has very high operational reliability. The most commonly used insulating coating in motors is the VL0241. Even in humid conditions, it can very well prevent the passage of current. Ceramic coated bearings also require sealing. Product application: It is suitable for motors, generators, especially variable frequency motors. There are three types of insulating bearings that are often sold on the market: surface-coated ceramics, surface-coated resins, and ceramics for rolling elements. Surface coated ceramics have the widest range of uses. Installation method of electric insulating bearing: The insulating bearing chamber is made of insulating material with a certain hardness in the inner hole and the end surface of the bearing. Matters needing attention when installing insulated bearings, do not directly hit the bearing surface with a hammer during installation, and do not use insulated bearings with surface defects to clean the bearing chamber and bearings. Do not adhere to the conductors and choose a suitable shoulder. To avoid current flowing from the bearing side through the bearing, the bearing chamber must be inverted at least 0.5MM deep slope 10-15 & deg; angle, for DC motor, the shaft should be grounded during the resistance test. 


  • Related Products
Basic Bearing No. Bore d (mm) Outer Diameter D (mm) Type

6022M/C3VL2071 110 170 Deep groove ball electric insulation bearing
6330M/C3J20A 150 320 Deep groove ball electric insulation bearing
6330M/C3J20AA 150 320 Deep groove ball electric insulation bearing
6413M-C3-J20A 65 160 Deep groove ball electric insulation bearing
6038/C3J20B 190 290 Deep groove ball electric insulation bearing
6215M/C3J20A 75 130 Deep groove ball electric insulation bearing
6418MC3 90 225 Deep groove ball electric insulation bearing
6311/C3J20B 55 120 Deep groove ball electric insulation bearing
6320/C3J20C 100 215 Deep groove ball electric insulation bearing
6418/C3J20C 90 225 Deep groove ball electric insulation bearing


Leave Message