6028M/C3 Bearing

Deep groove ball copper retainer bearing 6028M/C3

6028M/C3 Bore d (mm): 140
6028M/C3 Outer Diameter D: 210
6028M/C3 Type: Deep groove ball copper retainer bearing
Email: [email protected]


  • 6028M/C3 Details
TR Insulated Bearing Co.,LTD specializes in selling 6028M/C3 Deep groove ball copper retainer bearing, 6028M/C3 bearing related information: Model: 6028M/C3 Bearing; Type: Deep groove ball copper retainer bearing;Bore Diameter (mm) : 140; Outer Diameter (mm) : 210, if you want to know more about 6028M/C3 Bearing for information, you can do online consultation or call the hotline and email us [email protected], we will serve you in detail.
 
6028M/C3 Bearing TR deep groove ball bearing installation method Nine-star deep groove ball bearing installation method 1: press-fit: the inner ring of the bearing and the shaft make a tight fit. When the outer ring and the bearing seat hole are loosely fitted, the bearing can be pressed first by the press. On the shaft, then insert the shaft into the bearing housing hole together with the bearing. On the end surface of the bearing inner ring during press-fit, a mounting sleeve made of soft metal material (copper or mild steel), bearing outer ring and bearing housing hole Tight fit, when the inner ring and the shaft are loosely fitted, the bearing can be pressed into the bearing housing hole first. At this time, the outer diameter of the assembly sleeve should be slightly smaller than the diameter of the seat hole. If the bearing ring and the shaft and the seat hole are both When tightly fitting, install the inner ring and the outer ring to press the shaft and the seat hole at the same time. The structure of the assembly sleeve should be able to simultaneously tighten the end faces of the inner ring and the outer ring of the bearing. The installation method of the nine-star deep groove ball bearing is as follows: heating: By heating the bearing or housing, using thermal expansion to transform the tight fit into a loose fit installation method. It is a common and labor-saving installation method. This method is suitable for the installation of bearings with large interference, before the hot loading or The ferrule of the separable bearing is placed in the fuel tank Heat 80-100 ° C, and then remove it from the oil as soon as possible onto the shaft. In order to prevent the inner ring end face and the shoulder from sticking tightly after cooling, the bearing can be axially tightened after cooling. The bearing outer ring and light metal When the bearing seat is tightly fitted, the heating method of the heated bearing seat can be used to avoid the surface of the mating surface being scratched. When heating the bearing with the oil tank, there should be a grid at a certain distance from the bottom of the box, or the bearing should be hung with a hook. The bearing should not be placed on the bottom of the box to prevent the sinking of impurities into the bearing or uneven heating. There must be a thermometer in the tank. Strictly control the oil temperature should not exceed 100 °C to prevent tempering effect and reduce the hardness of the ferrule. 


  • Related Products
Basic Bearing No. Bore d (mm) Outer Diameter D (mm) Type

6034M/C3 170 260 Deep groove ball copper retainer bearing
6214M/C3 70 125 Deep groove ball copper retainer bearing
6036M/C3 180 280 Deep groove ball copper retainer bearing
6013M/C3 65 100 Deep groove ball copper retainer bearing
6218M/C3 90 160 Deep groove ball copper retainer bearing
6313M/C3 65 140 Deep groove ball copper retainer bearing
6416M/C3 80 200 Deep groove ball copper retainer bearing
6022M/C3 110 170 Deep groove ball copper retainer bearing
6420M/C3 100 250 Deep groove ball copper retainer bearing
6021M/C3 105 160 Deep groove ball copper retainer bearing


Leave Message